LMS-1911S

Internal Laser Sight

For: Gov't Model 1911 (5" barrel) polished stainless

 

Specifications:

For: Goverment Model 1911 (5" barrel) polished stainless (Does not fit polymer frames)

Battery Model: LMS-392 (readily available silver oxide batteries commonly used in watches)

Accuracy (20 Yards): User Adjustable

Laser Operating Temperature: 15°-120° F

Wavelength: 635nm (red-orange)

Power Output: 5mW (brightest available - blinks for highest visibility)

Spot size: at 7 yds 5/16”, spot size at 25 yds 3/4”.

If any firearm has been ported, fluted or compensated either by the original manufacturer or by a gunsmith, LaserMax will NOT guarantee alignment. Custom alignment quotes for firearms may be obtained by calling LaserMax.

Please Note: 

1. Expect to change your batteries once a year with typical usage.

2. Battery operating temperature is 15°F-120°F

---

Installation Guide:

Download PDF

(To save document, right click on link and select Save Target As)

 

This is the original model with a separate recoil spring.

Installation Takes 5 Minutes. If you can field-strip your gun, you can install your LaserMax sight — no gunsmithing required! Almost instantly you'll have a laser-sighted weapon which can be used outdoors from dusk till dawn, or indoors round-the-clock.

The Only NATO Approved Laser Sight for Handguns. Law enforcement departments and military organizations around the world, including the North Atlantic Treaty Organization (NATO), specify LaserMax for their personnel.

Highly Visible, Highly Intimidating. Once you place that intimidating red dot, pulling the trigger may never even be necessary. If you must fire, the LaserMax improves aiming speed and increases accuracy, especially in high-stress situations.

FEATURES

• Totally internal – cannot be knocked out of alignment
  


• No permanent modification to gun – remove it anytime
  


• No need to change holster or give up your rail flashlight
  


• Compatible with your favorite grips and aftermarket accessories
  


• Drops into place, replaces original recoil spring guide
  


• The recoil spring included with this model is separate (you can remove it from the guide rod)
  


• Ambidextrous switch in custom take-down lever
  


• Deliberate on/off activation – no squeezing the grip, no shaking
  


• Pulsating beam for increased visibility
  


• Factory aligned (1911 models are also user adjustable for fine tuning)
  


• Quality assurance includes live test firing
  


• Made in U.S.A.
  


• Three-year warranty (excludes expendable parts).

Resources:

Image(s):    LMX1911M