LASERMAX J-MAX S&W J FRAME HAMMER

Features:

-Ability to select pulse or continuous wave (constant on) beam.
-Laser housing set high on the frame to avoid blocking the beam with finger.
-Ambidextrous activation to accomodate the left or right-handed shooter.
-Maintains alignment after battery change.
-Extra alignment tool (provided) and a spare set of batteries (not included) can be stored inside left grip for use on the range or in the field.

Specifications:

For: Most round butt, exposed/shrouded hammer J-Frame styles

Battery Type: 357 (2)

Accuracy: User-adjusted for windage & elevation

Laser Operating Temperature: 10°F - 130°F

Wavelength: 635nm (red/orange)

Power Output: 5mW

Spot Size: 5/16" @ 7 Yds; 3/4" @ 25 Yds

Installation Guide:

Download PDF
(To save document, right click on link and select Save Target As)

LMS-JMX-NH for most round butt, fully enclosed hammer J-frame styles
LMS-JMX-H for most round butt, exposed or shrouded hammer J-frame styles

Shoot Better, Every Time!
Enhances shooting accuracy with S&W J-frame revolvers. Adjustable windage and elevation settings for precise alignment.

Better by Design!
We have the laser in the right place! Positioned high along the bore line for maximum shooting accuracy, you never have to worry about blocking the beam with the LaserMax J-Max laser. Your trigger finger is along the frame until you are ready to shoot, in keeping with firearms safety training.

Don’t give yourself away!
Touch buttons on either side of the grip give you the on/off control - highly desired in a tactical or personal defense situation!

Select your mode!
Choose from Hi-Vis pulsating beam or continuous wave (constant on) beam. Highest laser power output commercially available, 635 nm red-orange laser.

Turn it on!
The J-Max can be activated from either side. Press the button once and the laser activates,
press it again and it turns off. Firing grip is maintained while turning laser on/off
- for maximum accuracy!

Feel the difference!
Recoil absorbing Santoprene® grips with low profile design contoured to your hand. Handy compartments for your alignment tool and a spare set of batteries, too! Battery changes will not change alignment!

The choice is clear! Compare!

	NEW! LaserMax J-Max	The Competitor
Location of Laser	Where it should be! High along the bore, away from trigger finger; trigger finger will not block beam when aiming	Low; behind trigger finger; beam obstructed when aiming
Laser Activation	Activation from either side, press button once to activate laser, press again to deactivate; will not create accidental light – important in a tactical situation	Squeeze-switch in grip
Master Switch	Yes (of course)	No
Battery Change	Laser stays aligned through battery change; no need to re-zero	Requires going back to range to re-zero after each battery change (laser detaches when you change batteries)
Battery Type	357 Silver Oxide (2)	2032 Lithium (2)
Battery Life	3.5 hours	4 hours
Extra Features	Automatic time-out after 30 minutes of continuous run-time (toggle once to reactivate)	None
Spare Batteries	Compartment under grip for spare batteries	None
Spare alignment tool for windage/elevation	Spare tool under grip (a total of two tools provided)	None
Beam Selection	User can select Hi-Vis pulsating or constant-on by switch under grip	Constant-on only
Cleaning	Sapphire window is easily accessed with tissue, cloth or swab	Recessed; swab required
MSRP	$219	$299
LMS-JMX-NH (non-hammered)	Buy Now	--
LMS-JMX-H (hammered)	Buy Now	--

DISCONTINUED ITEM: LMS-JMX-H

J-Max Side Mount Laser

Features:

Specifications: